Common Roofing Problems and How to Fix Them – ASAP Roofing and Exteriors
Roofs are the first line of defense against the elements, yet they often go unnoticed until a problem arises. At ASAP Roofing and Exteriors, we understand how quickly a minor roofing issue can escalate into significant damage. Below, we break down the most common roofing problems homeowners face and how to identify, prevent, and fix them with long-lasting solutions.
Leaky Roofs: Causes and Fixes
Leaks are among the most common roofing issues. They typically occur due to:
- Damaged or missing shingles
- Improper flashing installation
- Cracked vent boots
- Ice dams forming at the eaves
Solution:
Our team locates the leak source through a detailed inspection. Once identified, we replace compromised shingles, re-seal flashing with high-grade roofing cement, and install ice and water shields if needed. In cases of systemic damage, a partial or full roof replacement may be required.
Ponding Water on Flat Roofs
Flat or low-slope roofs often suffer from standing water, especially after heavy rain or snowmelt.
Problem Indicators:
- Water remains on the roof >48 hours
- Visible sagging or low spots
- Blistering or soft areas in the membrane
Solution:
We improve drainage by installing crickets, tapered insulation systems, or repairing the underlying deck to promote runoff. In severe cases, replacing the roofing membrane and reinforcing the slope may be necessary.
Shingle Curling, Cracking, or Loss
Extreme heat, age, and poor attic ventilation cause asphalt shingles to curl, crack, or break loose.
Why it matters:
- Exposes the underlayment to UV rays and moisture
- Increases vulnerability to wind and hail
- Decreases roof lifespan and insurance coverage
Solution:
We remove and replace all damaged shingles, examine the attic for ventilation issues, and add ridge and soffit vents if required. We use impact-rated architectural shingles that hold up in Santa Clara’s weather.
Flashing Failures Around Roof Penetrations
Flashing is metal sheeting used to seal edges and joints around chimneys, skylights, and vents. When improperly installed or corroded, it leads to persistent leaks.
Common signs:
- Dripping in the attic during rain
- Stains on ceilings near fireplaces or skylights
- Detached flashing pieces visible from the ground
Solution:
We remove old flashing, reseal the area using waterproof membrane flashing tape, and install new galvanized steel or copper flashing, custom-fabricated for each penetration.
Clogged or Broken Gutters and Downspouts
Gutters that overflow or pull away from the fascia often cause water pooling at the foundation and roof edge deterioration.
What to watch for:
- Watermarks on siding
- Eroded landscaping beneath gutters
- Ice dams forming in winter
Solution:
We clean and resecure gutters, adjust their slope, and install gutter guards to prevent future clogs. Fascia boards and soffits damaged by rot are replaced with PVC or treated wood to resist moisture.
Roof Ventilation Issues and Heat Buildup
Poor attic ventilation traps heat and moisture, accelerating shingle failure, mold growth, and energy inefficiency.
Warning signs:
- High attic temperatures
- Curling shingles
- Visible mold or mildew in attic spaces
Solution:
We install ridge vents, soffit vents, and attic fans to create continuous airflow. This protects your roof, improves air quality, and can lower cooling costs significantly.
Roof Damage from Storms and Wind
In Santa Clara, sudden windstorms and hail events can cause immediate damage to any roofing system.
Damage indicators:
- Shingle granules in gutters
- Dented metal flashing or vents
- Uplifted roofing seams or panels
Solution:
We offer emergency roof tarping and post-storm inspections. All storm-related issues are documented and repaired using impact-resistant materials that comply with Utah’s IRC building codes.
Moss, Algae, and Mold Growth
Dark streaks and green patches signal organic growth caused by shade, humidity, and poor drainage.
Risks include:
- Reduced roof lifespan
- Increased moisture retention
- Unsightly appearance
Solution:
We apply zinc or copper treatments, safely clean the roof using non-damaging chemical agents, and install zinc strips along the ridge to prevent regrowth.
Structural Sagging or Decking Issues
Over time, structural decking can sag due to moisture damage, overloading, or improper installation.
Symptoms:
- Noticeable dips in the roofline
- Soft spots underfoot
- Interior ceiling cracks or door misalignment
Solution:
We open the roof structure, replace rotten rafters or trusses, and install OSB or CDX decking reinforced with proper nailing patterns and moisture barriers.
Testimonials from Homeowners
“I had no idea our roof had such bad ventilation until the team at ASAP Roofing and Exteriors explained everything. They fixed it and lowered our summer bills. True pros.“
— Maria C., Santa Clara Vineyard Subdivision
“After a windstorm, our shingles were scattered across the lawn. ASAP Roofing came out that same day, documented the damage, and gave us a clear repair plan. Fantastic crew!“
— Travis B., Santa Clara Heights
Frequently Asked Questions
How often should I have my roof inspected?
We recommend an inspection at least once per year and after any major storm.
Can you fix just part of the roof?
Yes. If damage is localized, we can repair specific sections, though we always recommend assessing the full roof for hidden issues.
Are your repairs covered by warranty?
Yes. All repairs come with a workmanship warranty, and most materials carry 25–50 year manufacturer warranties.
What areas do you service?
We serve most of Utah. Click here to see the areas we offer services.
Why Choose ASAP Roofing and Exteriors
With years of experience in Utah’s roofing industry, ASAP Roofing and Exteriors stands out for our:
- Fast, honest estimates
- Premium, code-compliant materials
- No-pressure service model
- Free inspections and storm evaluations
We’re not insurance adjusters. We’re licensed contractors, and we get the job done right the first time—on time, every time.